itb8888通博

The horizontal spiral belt mixer is composed of a cylinder container, a spiral belt mixing blade and a transmission part; the spiral belt blade is generally made into two or three layers, the outer spiral collects the materials from both sides to the center, and the inner spiral transports the materials from the center to both sides, forming a comprehensive cross convection mixing. The product is international, suitable for mixing materials in different industries, widely used in pharmaceutical, food, fine chemical, petrochemical, pesticide, coating, cosmetics, plastic, pigment, feed.

1. It can be used for mixing powder and powder, powder and liquid. It can also be used as reaction equipment and drying equipment.

2. The screw belt mixer has a good effect on the mixing of sticky or cohesive powder particles and the mixing of liquid and paste materials added to the powder particles. The cylinder cover can be made into a full open door to facilitate the cleaning and replacement of the equipment.

3. Good mixing uniformity, which can make a variety of materials with a large proportion evenly mixed, especially for materials with different proportion.

4. The mixing process is mild, and the crushing of materials is small.

5. Through special design, the equipment can meet GMP standard requirements.

6. High mixing speed and efficiency.

7. Large loading coefficient, small energy consumption, fast discharging and convenience. Usually, a batch of materials will be discharged in 2-5 minutes.

8. The equipment operates stably and reliably, with few wearing parts, long service life, convenient maintenance and simple operation.

9. It can be disassembled flexibly. The main shaft of the screw belt is connected with the flange of the drive shaft in the barrel. It can be disassembled quickly when the type of the mixing shaft needs to be repaired or replaced. Flexible disassembly and assembly design makes the U-shaped simplified body completely welded with both ends of the plate to avoid the gap of accumulated materials caused by the connection of the large flange of the simplified body and reduce the residue.